SB111 Ready to Paint, Stoneware Bisque Handled Bowl by Mayco Colors

Description

SB111 Handled Bowlin ready to paint, Soft-Fired, Cone 04, Stoneware Bisque.8 W x 4 H x 6 DThis item is unpainted.You are purchasing an unfinished, Ready to Paint, Piece of Ceramic PotteryHand Glazed Bowl ComboProducts UsedBisqueSB-111 Handled BowlColorSW-106 AlabasterSW-125 Purple MintSW-127 OlivineSW-128 CordovanDecorating AccessoriesCB-604 #4 Soft FanBT-910 Synthetic SpongesAdditional MaterialsPencilSlip Trailer (Xiem Studio Tools)InstructionsBegin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.Load a slip trailer with SW-128 Cordovan.On the inside edge of the bowl, make fat inverted loops with a slip trailer, two rows, it will be necessary to rest the bowl on an angle so the loop will keep its shape till the glaze is set. Apply 2 coats. Allow to dryUsing a CB-604 #4 Soft Fan, apply 2 coats of SW-127 Olivine to the entire piece. Allow for your glaze to fully dry in between each coat.When the glaze is dry, apply 2 coats of SW-106 Alabaster to the entire piece. Recede the second coat on the outside of the bowl.After applying the 2ndcoat of SW-106, and while the glaze is still wet, apply 1 coat of SW-125 Purple Mint to the entire piece. Recede from the bottom of the bowl for this coat.With a damp sponge, wipe off any excess glaze off the foot of bowl.Place un-stilted, on a high-fired, kiln washed kiln shelf.Fire to shelf cone 5/6.