Kitronik Breadboard breakout for the BBC micro:bit | Dryad Education

Description

The Breadboard breakout for the BBC micro:bit allows the user to plug a BBC microbit into a standard 2.54mm pitch breadboard. Two 11 way pin headers are used to make connections into the breadboard.\
\
The micro:bit slots into the edge connector on the top side of the PCB. No extra tools are required for installation. The front of the BBC micro:bit (the side with the LEDs) should be inserted facing the same side as the 3V pin.\
\
The edge connector has connections on only one side, so if the BBC micro:bit is inserted in reverse orientation, it will not work.\
\
The PCB is designed to plug across the middle slot of a breadboard, the same placement as an IC component.\
\
Features:\
The microbit slots into the on-board edge connector.\
This breakout board plugs straight across the middle slot of a standard 2.54mm pitch breadboard, just like an IC component.\
The microbits pins are broken out to 2 x 11 way header pins.\
Use jumper wires to connect from the header pins to the breadboard.\
No tools or soldering required for installation.\
microbit to breadboard prototyping made easy.\
Contents:\
1 x Breadboard breakout for the BBC micro:bit.\
Dimensions:\
Length: 58.4mm.\
Width: 12.8mm.\
Height: 20.76.\
Pin Pitch: 2.54mm